[AMRadio] HB Transmitter Schematic

[Mike Sawyer]

Isn't this essentially the same idea behind the BC-610? It ran a single 
250TH and used only one half of the jackbar.
Mod-U-Lator,
Mike(y)
W3SLK
----- Original Message ----- 
From: "John E. Coleman (ARS WA5BXO)" <wa5bxo2006 at pctechref.com>
To: "'Discussion of AM Radio in the Amateur Service'" 
<amradio at mailman.qth.net>
Sent: Sunday, June 03, 2007 3:38 PM
Subject: RE: [AMRadio] HB Transmitter Schematic


Tom I am attaching a schematic diagram mailing direct to you, of a typical
circuit hope it helps.

This circuit is the same as a push-pull version but with one tube and one
neutralizing capacity taken out for single-ended operation.

See Push Pull Triodes in Class C at
 http://www.qsl.net/wa5bxo/pptriodes/pptriodes.htm