[AMRadio] Use of an oscilloscope to monitor am audio

[Jim Miller WB5OXQ]

I just checked the specs on my scope and it says it is a dual channel dual 
trace with X-Y capability frequency range DC to 60 Mhz.

----- Original Message ----- 
From: "Jim Wilhite" <w5jo at brightok.net>
To: "Discussion of AM Radio" <amradio at mailman.qth.net>
Sent: Saturday, March 18, 2006 3:25 PM
Subject: Re: [AMRadio] Use of an oscilloscope to monitor am audio


> Jim I have a Tek 465M that I use.  I also have a tuner with a built in 
> balun that I do not use.  I use the tuner with coax  when operating off 
> the resonance of my antenna.  My scope and probes are good to 100 Mc and 
> provide enough bandwidth to monitor up to 29 Mc.  If your 453's bandwidth 
> is less, you won't be able to go as high.
>