[AMRadio] Vacuum or electronic relay

[KA5MIR]

Brian,
  Have you decided against a solid state relay?  I'd like to try one of those  
to see if it will solve a high current relay sticking problem I'm having.

Anyone on here used a SS relay in a high current position?  Did it hold up?

73',
KA5MIR
 

On Friday 01 December 2006 10:59, A.R.S. - W5AMI wrote:
> I am using an old relay from a BC-610 to apply primary voltage
> (110vac) to a HV transformer in my rig.  I would like to replace this
> with a vacuum relay or something similar.  The contacts need to carry
> about 25 amps on each pole, one for the final supply, and one for the
> modulator plates on a separate HV transformer.  Have any of you bc-610
> owners done this upgrade?  If so, can you recommend a good relay for
> this?  Prefer one with a 110 volt coil.
>
> Thanks.
> Brian / w5ami