[AMRadio] Mod Transformer Available

[Byron Lichtenwalner]

Jim
I agree.  They add up to me.  The impedance defines the turns ratio, the
voltage rating defines the insulation characteristic, and the current
defines the size of the core and wire size in the secondary.
Byron, W3WKR
----- Original Message ----- 
From: "James M. Walker" <chejmw at acsu.buffalo.edu>
To: "Discussion of AM Radio" <amradio at mailman.qth.net>
Sent: Tuesday, September 27, 2005 8:34 AM
Subject: Re: [AMRadio] Mod Transformer Available


> The ratings are 5500 primary 1.14 KVA, and 5500 secondary
> 198 Amp DC.
>
> Don,
> I don't know what you mean by don't add up! The discussion
> was pertaining to the use of this particular transformer, in
> conjunction with a specific set of tubes, and RF stage.
> What doesn't add up?
> Jim
> WB2FCN
>
> "Donald Chester" wrote
>
> > If you calculate, those numbers don't add up.
> ______________________________________________________________
> > AMRadio mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/amradio
> > Help: http://mailman.qth.net/mmfaq.html
> > Post: mailto:AMRadio at mailman.qth.net
> > AMfone Website: http://www.amfone.net
> > AM List Admin: Brian Sherrod/w5ami
> >
> >
>
> ______________________________________________________________
> AMRadio mailing list
> Home: http://mailman.qth.net/mailman/listinfo/amradio
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
> AMfone Website: http://www.amfone.net
> AM List Admin: Brian Sherrod/w5ami