[AMRadio] Pi-Net vs Link Couple

[ronnie.hull]

well it clearley shows on the top of the tranny 4100 - 0 - 4100.. I'll test 
it out this weekend and we'll know then.

did you ever even put power to this transformer?

R



---------- Original Message -----------
From: Geoff <w5omr at satx.rr.com>
To: Discussion of AM Radio <amradio at mailman.qth.net>
Sent: Thu, 22 Sep 2005 07:22:16 -0500
Subject: Re: [AMRadio] Pi-Net vs Link Couple

> ronnie.hull wrote:
> 
> > <>Mike I'm the fellow that is going to build up a Class C final using 
> > a 450TL.
> > I would love to get a copy of that schematic for the 450TH rig in the 
> > Editors
> > and Engineers handbook. I have a few of those, but apparently, not 
> > that one.
> >
> > I have a very nice B&W 850A or 852 that I can use in this rig. Either 
> > should
> > handle that tube fine, considering I'm not going to run much more than 
> > 2500
> > volts on it anyway. Maybe 3000.
> >
> > I just got the worled biggest honker daddy plate transformer from W5OMR.
> > 8200V center tapped ( 4100 - 0 - 4100 ) at 4.5KVA !!! Yeah suh, takes 
> > 3 men
> > and a dolly to move it!!
> 
> I think you're going to find, and we talked about this, that the 
> transformer is 4100v across the entire secondary (@4.74kVA)
> 
> ______________________________________________________________
> AMRadio mailing list
> Home: http://mailman.qth.net/mailman/listinfo/amradio
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
> AMfone Website: http://www.amfone.net
> AM List Admin: Brian Sherrod/w5ami
------- End of Original Message -------