[AMRadio] AM Amps

[Gary Schafer]

First you would need to tune it up at the 1500 watt out level. Then 
apply enough drive from the ranger so you have about 375 watts carrier 
out. That will be good for 100% modulation peaks. If you want to run 
more than 100% modulation then you would need to lower the carrier level 
with less drive.

73
Gary  K4FMX


Byron Lichtenwalner wrote:
> If you had an amp rated at 1500 pep rated for Continuous Commercial 
> Service and were going to drive it with a Ranger, (with W3AM's 
> modification as an example) where would you set the carrier level with 
> no modulation?
> Byron, W3WKR
> ______________________________________________________________
> AMRadio mailing list
> Home: http://mailman.qth.net/mailman/listinfo/amradio
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
> 
>