[AMRadio] Ranger schematic needed

[Mahlon Haunschild]

Paul,

Assuming that your Ranger is unmodified, on the rear apron is a crystal 
socket; that's what the TR relay connects to (110 VAC!  caution!).

Many hams have replaced the crystal socket with a pair of phono jacks; 
not very safe, in my opinion.

Take a moment to check the jumpers on the 9-pin plug; if they aren't 
correct or are broken, the transmitter won't work.

regards,

Mahlon - K4OQ
> 
> 
> 
> 
> --__--__--
> 
> Message: 6
> From: "Paul Sokoloff" <dogfaces at comcast.net>
> To: <amradio at mailman.qth.net>
> Subject: Re: [AMRadio] Ranger schematic needed
> Date: Sat, 22 Nov 2003 12:42:43 -0500
> Reply-To: amradio at mailman.qth.net
> 
> Thanks Rick,
>     The jumpers are in place, but where do I connect the 110V antenna relay.
> I have found HLR's mods etc.
> 
> Thanks,
> 
> Paul Sokoloff
> 508 Gen. Patterson Drive
> Glenside, Pa. 19038
> USA