[AMRadio] Schematic Needed

[k0ng at inebraska.com]

  Hello Jim:

  I cant scan a schematic for you but can copy mine and send it via post.
  Let me know if you have not received one yet. My modulation on the G-50
  has been described as "excellent" using a D-104 microphone. The ones I
  have heard sound good too, but not many lows. The receiver sensitivity
  in mine is worse than I think it should be, even for its time. I think it
  was around 6 uV for only 6 dB S+N/N ratio. Have not worked on it lately.
  My dial drive slips also but hate to tear out the reduction drive (lazy).

  Good Luck es 73 DE Charlie,  K0NG.

Quoting Jim candela <jcandela at prodigy.net>:

> 
> 	Hi Fellow AM'ers;
> 
> 	I am restoring / modifying a Gonset G50 six meter transceiver. I have 
the
> schematic, and documentation from the Bama ftp sight. The schematic there is
> of poor quality, and reading component values is next to impossible. Does
> anyone have a quality print of this schematic? A good print scanned would do
> as would a 11 X 17 paper copy.
> 
> 	I got the transmitter going pretty decent. The stock modulation really
> stinks, so instead of fixing it Gonset made it a selling feature. With only
> minor changes it is now approaching "decent".
> 
> 	I am having problems with the receiver, and the squelch circuit. This is
> where I really need a readable schematic.
> 
> 	Anybody out there with G50 on the air experience?
> 
> Regards,
> Jim candela
> WD5JKO
> 
> _______________________________________________
> AMRadio mailing list
> AMRadio at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/amradio
> 
> _______________________________________________
> AMRadio mailing list
> AMRadio at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/amradio
>