[AMRadio] need 2 watt non inductive resistors

[Geoff Edmonson]

On Wednesday 24 December 2003 08:14, Jim Candela said 
(and I am -not- making this up!)::


> An AM rig with a single 6146, or 2e26 in the
> output may be a better approach to drive the T-Bolt. Good luck with your
> project..

I might mention, also, on my Viking II to excite the 250TH rig, I've left the 
6146's in, but with the plug-in coil grid circuit in the final, coupled with 
the amount of coax I use to feed the rig, I can reduce the amount of drive 
out of the Viking II by switching IN the 160m capacitor, and re-dipping the 
final in the Viking II.  The roller inductor is up around 75 or 80 (on a 
scale from 0 - 100) but the output is much lower.

Just another thought.

Merry Christmas

73 = Best Regards,
-Geoff/W5OMR

-- 
 10:36am  up  17:22,  4 users,  load average: 0.54, 0.32, 0.27