[AMRadio] Suggestions for restoring a DX-100

[Mike Dorworth]

Well I can tell you that every resistor in the set must be checked. Heath
used a resistor that draws in moisture through the years. Memorize the color
code and get a good digital ohmmeter and check them all. Any over 10 percent
had better go now, instead of later. 99.9 percent do not need to be
unsoldered to check. They would be reading low. ANY reading high would have
to go, whether in circuit or not..Wirewounds don't change value, they just
open clean. Lot's of luck with the project. Wish I had just one!, 73 Mike
K4XM



----- Original Message -----
From: john_walker_beasley <jbeasley at earthlink.net>
To: AM Radio Reflector <amradio at mailman.qth.net>
Sent: Sunday, March 24, 2002 12:43 PM
Subject: [AMRadio] Suggestions for restoring a DX-100


Gentlemen:

    I have a DX-100 and I am looking for any tips or advice
before I begin working on it.  text/plain (text body -- kept)
  text/html
---
_______________________________________________
AMRadio mailing list
AMRadio at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/amradio