[AMRadio] Max power off from plate current dip problem 32v1...

[Gary Schafer]

Hi Vince,

Yes neutralization is usually the problem when max output does not occur at
the plate dip. That is one way to adjust the neutralization. Adjust it a
little at a time until the two exactly coincide. You will find that when
there is too much neutralization capacitance that the max output will occur
on one side of the plate dip and if there is too little neutralization
capacitance the max output will occur on the other side of the plate dip.

73
Gary  K4FMX


ka1iic at prexar.com wrote:

> Hi Guys...
>
> Got a problem with a Collins 32v1... seems the maximum power out occurs
> at a place away from the 'current dip'...  (just off of dip...)
>
> I'm measuring power out via a resistive dummy load and RF ampmeter
> in-line...
>
> Is this a neutraization problem or what???
>
> Thanks in advance
>
> 73
> Vince
> ka1iic
>
> _______________________________________________
> AMRadio mailing list
> AMRadio at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/amradio