[AMRadio] Type of glue to use

[Dee Almquist]

I use a high dielectric epoxi purchased from industial supply house. Works
great. This is a common problem with Johnson tanks.
Dee
http://w4pnt.8k.com
Patty & Dee's Marina Collectors of "firebottle" radios
Dee Almquist
534 W. Main St.
Waynesboro, Va. 22980
(540)249-3161 Cell: (540)480-7179
----- Original Message -----
From: Gary Schafer <gschafer at mediaone.net>
To: <amradio at mailman.qth.net>
Sent: Monday, February 11, 2002 1:57 PM
Subject: [AMRadio] Type of glue to use


> I have a B&W 850 tank coil that needs repair. There were some plastic
> (?) strips glued to the coil spacers to support the whole coil. The glue
> has separated and the strips warped. I am thinking of cutting some
> Plexiglas strips and gluing them to the coil spacers. Not sure of the
> type of material that they used for the coil turns spacers.
> What is a good type of glue for this?  (considering heat and RF)
>
> Thanks
> Gary K4FMX
>
>
> _______________________________________________
> AMRadio mailing list
> AMRadio at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/amradio
>