[AMRadio] Viking II

[Brian Carling]

On 31 Mar 2002 at 15:34, ATanner283 at aol.com wrote:

> The HV goes no further than where the wires
> were cut at the junction of L1, C9, and R13. If i tie these back
> together, the HV still does not work, and the tubes(6146) go red.

If the 6146 plates glow red then you most probably ARE delivering some HT+ 
(that's B+ for you yanks!) and I suggest you take al ook at where you are placing 
your meter! It sounds like the BIAS supply may be missing from those 6146es, 
allowing them to draw excess current from the B+ supply.

Do you have a circus diagram of that Viking II that you can compare voltages with?