[Alinco] Dual Band HT and other accessory items FS

[Ken Simpson, W8EK]

Alinco dual band HT, plus other Alinco items For Sale:


Alinco DJ-580 dual band (2m and 440 MHz) HT:

This HT receives from 110 to 174 MHz in the VHF position,
which includes the AM Aircraft band. 440 to over 480
MHz in the UHF position. Of course it transmits in the
2 meter and 440 MHz ham bands. It is my understanding
that it can also be modified to receive into the 800
and 900 MHz region. It will also cross band repeat,
and is an extremely rugged radio.

Power output has 3 different levels. With the
7.2 V battery packs, it has 0.25 W / 1 W / 2.5 W.
If used with the larger 12 V batteries, it will
produce 0.25 W / 1.2 W / 5 W.

This particular unit is in very good shape, both
electrically and cosmetically. The keyboard has very
crisp and clear lettering. It includes the empty
6 cell battery pack that takes six AA cells, rubber
duck antenna, belt clip, wrist strap, and paper work.
$140


Alinco Protective Battery Plate
This is a "dummy" plate that slides on to the HT in place
of the battery. It is used when powering the HT from an
external power source, to prevent the battery terminals
from being exposed and causing accidents. $10

Alinco Carrying strap - Like new. $4


HT Speaker Microphones:

All of these have the 3.5 mm and 2.5 mm plugs on them,
as used by Icom, Alinco, Radio Shack, some Yaesu, and
other HTs.

Azden SDX-316
This is the rounder style speaker mic that fits nicely in
the palm of your hand. $ 20

Pryme Speaker Microphone
It works fine and look line new. $20

MFJ-287 Speaker Microphone
This fits the TH-21/31/41 series HTs, TH-205, TH-215, TH-415,
as well as others. It has a 3 conductor 3.5 mm plug and a 2
conductor 2.5 mm plug.
It works fine, and looks close to new. $15


Hand Microphone that can be used with Alinco rigs:

Hand Microphone with round 8 pin plug:

This hand mic works great on most Kenwood rigs with the
round 8 pin connector, such as the TS-430, TS-440, TS-570,
TM-241, TM-2530, TW-4000, and others, and also on most
Alinco rigs with the round 8 pin plug..
It only says "Electret Condenser Mic" on it, with no
model number.

Basically, this mic is like an MC-43, only with a couple
more features. Of course it has the mic and PTT switch;
it also has up/down switches on the top. There are four
"extra" buttons labeled Call, VFO, MR, and PF. What these
four buttons do depends on the rig that it is attached to.
They will function on some rigs, and are completely useless
on others. There is also a "Lock" switch on the back.

Regardless if you use the four extra buttons or not, you
still have a mic that works like an MC-43.

This mic works fine, and looks like new. I am guessing it
came with a rig, and was immediately put in the drawer. $30


DTMF Touch Tone Microphones:

CES 610 L DTMF Touch Tone Mic
Can manually dial a number, or automatically store it in
the mic, and "speed dial". 12 digit touch tone pad on the
front. 8 pin modular plug (like computer LAN).
Looks to be new. $38

KDK DM TT-1 DTMF Touch Tone Mic
This mic has a 12 digit touch tone pad on it, with a
switch to turn the pad on and off. With 4 pin plug.
It works fine, and looks great. $35

KDK Model TM-2 DTMF Mic
With touch tone pad and up-down switches. It presently
has a round 8 pin connector wired for Kenwood/Alinco.
Nice condition. $40

Johnson 250-0761-010 / CES 655 L DTMF Mic
It has a 12 digit pad on the front, and is a rugged mic.
Presently with 4 pin plug. Looks to be unused. $38


I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, etc.
Just too many to list here. Please e-mail your requests.

Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400