From c696 at nb.sympatico.ca  Wed Jan 19 15:39:08 2005
From: c696 at nb.sympatico.ca (Don Taylor)
Date: Wed Jan 19 16:35:17 2005
Subject: [Alinco] DX70TH is dead
Message-ID: <013901c4fe6d$df380f60$03000004@downstairs>

I have a DX70Th radio that recently died. I was using a regulated power
supply and suddenly the digital readout lights went out and the radio
stopped transmitting. Checking found that the power supply regulator was
burned out, allowing full transformer voltage (about 40 volts) at the output
connection. The radio digital readout still comes on and the radio receives.
Any suggestions. Is it possible that the radio shorted somehow and burned
out the power supply regulator, or did the power supply regulator fail and
burn out the radio. If that happened, why does it still receive?
Thanks for any help
Donald L. Taylor
5550, Route 880
Dobson's Corner, New Brunswick
E4Z 4B7
1(506)372-4661
c696@nb.sympatico.ca
VE1DLT
This message transmitted by the power of God
Who, is these last days, has choosen
to reveal to mankind some of the wonderful
secrets of His creation

From CullenL at aol.com  Fri Jan 28 09:20:38 2005
From: CullenL at aol.com (CullenL@aol.com)
Date: Fri Jan 28 09:27:39 2005
Subject: [Alinco] 605 lock up
Message-ID: <f.3d530e74.2f2ba436@aol.com>

Has anyone else had the experience of having the 605 lock up in the transmit 
mode when a transmission exceeded the TOT time? It is necessary to switch the 
radio off to release the lockup. Did I do something wrong? 
cullen K5HAL
