[Alinco] Re: Alinco Digest, Vol 8, Issue 3

[Dan Clark]

  Get into the settings and see if there is a setting called 'SP OF' or something similar.  My 610 has this setting to defeat the internal speaker.  I'm not sure why that is necessary as the external speaker plugs into a switching jack, but . . . this might be an easy fix.
  73,
AG4HG
 ------------------------------

Message: 3
Date: Mon,  4 Oct 2004 14:48:47 -0400
From: barrie at eos.net
Subject: [Alinco] DR-130T help
To: alinco at mailman.qth.net
Message-ID: <1096915727.41619b0f46d53 at webmail2.eos.net>
Content-Type: text/plain; charset=ISO-8859-1



Hi: I just acquired a used DR-130T Sn T009626 with no instructions at a hamfest
yesterday. Everything seems to work ok except the audio output in to the
internal speaker is dead ( yet the external works ok) and  I can not figure out
how to get it into simplex mode.  It seems that there is no  DR-130T 
Instruction Manual posted to Alinco's web site.  I did find the service manual.
 Was there something that would usually fail in the audio circuit? The only way
I can get it to simplex is to set the offset to zero and then save it to
memory.
Any help that anyone can provide would be appreciated.
Over all , I am impressed with the quality of the radio...
 
James, WA8SDF

-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/



------------------------------