[Alinco] DR-130T help

[Bill Kuhn]

Repeatedly hitting the 'F' function button followed by the TOT button will shift between +, -, and simplex offset.

If you have audio on your external speaker, all audio circuitry *except* the physical wires to the internal speaker and the internal speaker itself are OK.

I have a DR-130T by the way and I like it. I have the additional memory module on it so it sports 100 channels.

If you can't download the manual somewhere, let me know and I'll scan the important (read: not Chinese/Japanese/French/Spanish) parts.

Bill Kuhn - KC0NYL

_______________________________________________

Bill Kuhn - MCSE, MCP+I
bkuhn at kuhngroup.com

The Kuhn Group, Inc
A Microsoft Certified Partner 
http://www.kuhngroup.com
info at kuhngroup.com
877-367-5846
_______________________________________________

-----Original Message-----
From: alinco-bounces at mailman.qth.net [mailto:alinco-bounces at mailman.qth.net] On Behalf Of barrie at eos.net
Sent: Monday, October 04, 2004 1:49 PM
To: alinco at mailman.qth.net
Subject: [Alinco] DR-130T help



Hi: I just acquired a used DR-130T Sn T009626 with no instructions at a hamfest
yesterday. Everything seems to work ok except the audio output in to the
internal speaker is dead ( yet the external works ok) and  I can not figure out
how to get it into simplex mode.  It seems that there is no  DR-130T 
Instruction Manual posted to Alinco's web site.  I did find the service manual.
 Was there something that would usually fail in the audio circuit? The only way
I can get it to simplex is to set the offset to zero and then save it to
memory.
Any help that anyone can provide would be appreciated.
Over all , I am impressed with the quality of the radio...
 
James, WA8SDF

-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/

List Owner: Ray Brown, KBØSTN

_______________________________________________
Alinco mailing list
Alinco at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/alinco