[AK-VHF] NET: Feb 5 - 144.200 USB

[Ed Cole]

Net Report:

144.200 (noise low, not registering on s-meter)
KL7BSC - S0 (partial copy)
KL7CA - S0 weak copy
KL7XJ - S9
KL0YO - by relay
KL6M - S8/9
very good propagation on 2m

223.50:
KL7XJ

6m net:
50.125 (noise S5):
KL7BSC - S6 difficult copy but better than 2m

50.250 psk31
KL7BSC strong solid copy
still having problems with FL-digi T/R commands of my K3; after some 
searching found the proper settings for it.

also had failure of 2m yagi which either was issues with coax switch or 
maybe cables (loss of indicated power and connection to yagi - resolved 
but still a mystery.

Wondering why 146.94 repeater requires 110w to a yagi for access when 
both 147.30 and 147.33 repeaters key up with my only running 10w.  Not 
propagation.  146.94 desenced or suffering interference/noise requiring 
high squelch setting??  I receive it on my IC9700 at S9+15 on my yagi; 
S9 on my vertical.

73, Ed - KL7UW

On 2/4/2022 8:18 PM, Ed Cole wrote:
> Net will begin on 144.200 USB at 9:30am.  I will also simultaneously 
> monitor 223.50 FM for check ins.
> 
> We will follow the standard net with a 6m net at 10:30am starting with 
> 50.125 SSB until 10:45.  At that time we will switch to 50.250 and run 
> psk31 for any who wish to join KL7BSC and I.  Will try to wrap up the 6m 
> net by 11am.
> 
> Hope to see many of your tomorrow.
> 
> 73, Ed - KL7UW
> 
> 
> 
> ______________________________________________________________
> ak-vhf mailing list
> Home: http://mailman.qth.net/mailman/listinfo/ak-vhf
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ak-vhf at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>