[AK-VHF] MSK144 with WSJT-X 2.0 question

[Edward R Cole]

Ron,

K6B is not listed on QRZ.com so probably a false return or too noisy 
to decode properly.  I would go to N0UK logger called ping jockey or 
the ON4KST logger and ask if anyone is currently running MSK144.  Try 
to find a station less than 1200 miles from you for best chances to 
see a ms signal.

Once you have detected a few then you will have more confidence in 
seeing random callers.

I may get my 2m array raised today if not too cold.  1200w amp needs 
only one more test to be QRV for eme/ms.
Unfortunately too far from you for ms, Ron.

73, Ed - KL7UW

At 04:43 AM 1/6/2019, Ron VE8RT wrote:
>    After setting up WSJT-X for receive only (at this point) it was left
>on monitor for this weekend.  When I checked it this morning I had the
>following:
>
>002900  -5  4.0  1437  & <...> GLDKIKU K6B RR73
>
>I was monitoring 144.1450 MHz with an 8 element (no pre-amp) quad
>pointing 210 Degrees using an FT 726R for the monitor receiver.  The
>computer was running Linux Mint 19 with the latest WSJT-X software.
>
>Apart from the RR73 I would have dismissed this, is it anything, and if
>it is I don't suppose that without a decoded grid square I'd have any
>idea of the grid square?
>
>My QTH is Yellowknife, NT, in grid square DP22.
>
>    Ron VE8RT
>
>--
>Ron VE8RT <ve8rt at yknwt.ca>
>______________________________________________________________
>ak-vhf mailing list
>Home: http://mailman.qth.net/mailman/listinfo/ak-vhf
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:ak-vhf at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html

73, Ed - KL7UW
   http://www.kl7uw.com
Dubus-NA Business mail:
   dubususa at gmail.com