[AK-VHF] NET: May-21 144.200 USB or FM?

[Edward R Cole]

I've removed my station control unit to install the digital az-el 
display for my dish, so I have my control cable to the eme array 
disconnected.  This disables my usual 2m-SSB equipment.

I have connected my KX3-2M via a 60w MOT amp running 30w output to 
drive my 150w linear to about 120w on 144.200.  Not sure if the MOT 
amp will operate linearly for SSB so might have to switch to FM in 
that case (on 144.200).

The four eme yagi are connected thru the TR relays by default with no 
control voltage, but tower top preamps will not be powered.  I will 
only be able to use the internal preamp in the KX3 so my normal Tx 
signal will be slightly lower and my hearing ability hampered.

I expect to have the control panel back in service by Sat. May 28.

73, Ed - KL7UW
http://www.kl7uw.com
     "Kits made by KL7UW"
Dubus Mag business:
     dubususa at gmail.com