[AK-VHF] QRV 2230z 506.8 KHz CW

[Dale Hershberger]

Ed,
I just got home and read the email.  I tuned in and am copying your beacon.
I am using the G5RV antenna.  I also hear the flutter in the tone.  It
does not sound like a solid CW tone.  Good copy though and surprisingly
my noise floor is very low there.  I do not see the needle move at all for
signal strength.

Dale - KL7XJ
On 4/15/2012 2:41 PM, Edward R. Cole wrote:
> I am sending a CW Beacon on 506.8 KHz where swr=1.4.
> Had some rain so tuning inverted-L antenna is not going to be done
> today thus operating higher than normal.  Monitoring a carrier at
> 506.1 MHz, no other signals in band.
>
> Power output 1.0 RF amps or roughly 40w; ERP=1.7w
>
> I will continue until 0200z if transmitter continues to operate well.
> Send me the text of the beacon for a SWL QSL
>
>
> 73, Ed - KL7UW, WD2XSH/45
> ======================================
> BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
> EME: 50-1.1kw?, 144-1.4kw, 432-QRT, 1296-?, 3400-?
> DUBUS Magazine USA Rep dubususa at gmail.com
> "Kits made by KL7UW" http://www.kl7uw.com/kits.htm
> ======================================
> ______________________________________________________________
> ak-vhf mailing list
> Home: http://mailman.qth.net/mailman/listinfo/ak-vhf
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ak-vhf at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>