So I have to enter any odd frequency that SFH might be operating on in my memory settings in WSJT?  That seems like not worth the work.  What am I missing?  He was on .911.  I turned my VFOs to .911.  Click on the station and it reverted both VFOs to .915.  What I’m hearing is any non-standard frequency operating by SFH has to be entered in WSJT memory or SFH won’t work, right?

On Aug 7, 2024, at 5:34 PM, Jay Bromley <jayw5jay@gmail.com> wrote:



Hi Steve, 

Have you added those DX frequencies?  If not go to File, then Settings, then click over to the frequency tab.  Right click on any frequency, then insert the DX frequency.  No need to do a filter unless you want to.  Then click apply and OK.  Now under the drop down menu for bands/frequencies the new frequency should be there.  Once you click on it that should light the Green Circle next to it with an S inside it.  You should be good to go from there.

Good luck and 73 de w5jay..

On Wed, Aug 7, 2024 at 5:25 PM Steven Rutledge <steven.t.rutledge@gmail.com> wrote:

When I engage F/H in SF mode, if the station is not on a normal FT8 freq, when I click on station I’m calling it goes back to .074.  No idea what is causing this.

Steve, N4JQQ
______________________________________________________________
ADXA mailing list
Home: http://mailman.qth.net/mailman/listinfo/adxa
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ADXA@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
ADXA mailing list
Home: http://mailman.qth.net/mailman/listinfo/adxa
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ADXA@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html