[ADXA] WSJTx FOX Hound Question....

[Dennis Tune]

 My 2 cents on F/H...ALWAYS use F/H on a large DXPedition...The reason being that the Fox (3Y0K) may hear you 1 time in the pile and add you to the Que...5 minutes later when you get to the top of the Que he's going to send you a signal report...If you stay "Non-F/H" then he has to decode your signal report from the pile-up rather than all by yourself on his RX freq...say during that 5 minutes between you going into the Que and him calling you K5UR or W5ZN or some other big gun camps out on your spot in the pile then they will never hear you...And this pile-up has thousands of people calling so it's easy to be lost for a few cycles...especially if you're -18 to begin with...Now it's not the big guns fault because he's just picking a random spot to TX from above 1000...It's more the sheer number of stations that are calling (and lots of big guns) that can make you get lost in the pile...and believe me there has never been FT8 piles this big ever so my advice is to use F/H and let the program drop your TX down on top of them "in the clear" so to speak and they will have the best chance of hearing your reply...based on their settings so far I see that after 3 attempts to copy you they will move on to the next station in the Que and you go to time-out for 20-30 minutes meaning they won't pick you up again until your time-out is over...Now sometimes it will work but on piles this big it's better to take your best odds and use F/H...
Dennis Tune W5DM
    On Tuesday, March 3, 2026 at 10:38:17 AM CST, Randell Curtis, W5ZJ via ADXA <adxa at mailman.qth.net> wrote:  
 
 I've used fox hound quite a bit before most of the DX started using MSHV.  I have an issue with decodes not showing up in the RX Frequency window when I have selected fox hound mode. All is decoding fine in the band activity window.  I don't remember this being normal. I rolled back the version to 2.7 last night and it did the same thing. 
Is anyone else seeing this?  
Is anyone working 3Y0K without the transmit frequency jumping to theirs after they answer? 
By what I'm seeing on FB groups, and last night  on 40, many are not getting an RR73.
I may only get one shot at this, and I want to try my best to make sure I don't have a software/setting issue if it happens. 
Thanks
Randy/W5ZJ______________________________________________________________
ADXA mailing list
Home: http://mailman.qth.net/mailman/listinfo/adxa
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ADXA at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/adxa/attachments/20260303/f0b6ac5a/attachment.html>