[ADXA] Radial Connections

[Jay Bromley]

Hi John,

On some of my stuff while living in Fort Smith I crimped and used silver bearing solder (2%)made by Kester.  

 

Some like to use real silver solder, but you need a torch/flux for that.  For ham radio I think using regular solder is A-OK.  On AM broadcast they use a torch method with real expensive silver solder to withstand heat from a lightning strike and longevity.  Regular solder will turn to a white paste after a while and doesn’t like heat from lightning strike too much.  Still regular solder worked for me, but only saw it for a few years after the sod pushed it down 3 inches into the dirt.

 

With today’s cad welding that technique may be history?  73 de jay/w5jay..

 

From: adxa-bounces at mailman.qth.net <adxa-bounces at mailman.qth.net> On Behalf Of John McKinnie
Sent: Monday, December 12, 2022 5:10 PM
To: ADXA List <adxa at mailman.qth.net>
Subject: [ADXA] Radial Connections

 

Any one have lessons learned on radial connections that they would be willing to share? (i.e. solder, crimp, no connector but wrap end of radial wire around bolt on radial plate, coating, etc)

 

Thanks,

John

KT4AC

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/adxa/attachments/20221212/3f915eac/attachment.html>