[ADXA] 3D2CR 10 Mtr FT4 at 28180.0

[Lanny Aldrich]

Just worked 3D2CR on 18.104 .
K1LEC in Searcy with 50 watts and hex beam

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows

From: Earl<mailto:n5zm at n5zm.net>
Sent: Wednesday, September 22, 2021 7:12 PM
To: ADXA List<mailto:adxa at mailman.qth.net>
Subject: Re: [ADXA] 3D2CR 10 Mtr FT4 at 28180.0

Oops forgot the time 0005z

On 9/22/2021 7:10 PM, Earl wrote:
> Yup that's right 10 mtr FT4. Only took 25 min but squeezed in between
> all the JA's. Hi Hi.
>
> ZM
>
> ______________________________________________________________
> ADXA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/adxa
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ADXA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
ADXA mailing list
Home: http://mailman.qth.net/mailman/listinfo/adxa
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ADXA at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/adxa/attachments/20210923/693a260b/attachment-0001.html>