[ADXA] FT8....
David Norris
k5uz at icloud.com
Sun Mar 1 20:07:59 EST 2020
San,
If you have the Icom remote software you won’t even need an interface. I’m running WSJT (FT-8,4) through the LAN on a 7700 and a 7851. The 7600 mirrors the 7700 and should have the same ability. I do like how the Icoms run RTTY and PSK directly from the radio. True plug and play. You can do the similar with FT-8/4 via the LAN port.
I can send you the settings if you want to give it a whirl.
73
David A. Norris, K5UZ
Director, Delta Division
Sent from my iPhone
> On Mar 1, 2020, at 6:21 PM, Joel Harrison <w5zn at w5zn.org> wrote:
>
>
> Well the software is free and don’t know what your RTYY setup is but you may already be “setup” for FT8 !!
>
> ZN
>
>>> On Mar 1, 2020, at 5:13 PM, HamOP <k5yy1 at cox.net> wrote:
>>>
>>
>> Think I will wait til I am 80 years old to see if I have the extra money to spend on the hobby and all the peripherals for FT8 hooking up to my PC software which is 10-20 feet from my equipment. I see where Rick UR has worked the VP8 on FT8 and also FT8 on a couple of DXpeds recently, so at least he finally “gave in”….
>>
>> And, my eyesight is so bad now that I am afraid I would misread my call being confirmed .. On CW and SSB and RTTY I know for sure because I can hear CW and Voice and my RTTY printout is large and I can read the page. Oh well, another low band/mode count for me standing at 11 now. 21 CW and 24 would pacify me along with a lucky 3.5 CW QSO. I would yell loud again and wife would come running into the ham room from across the house. 😊 I will wait for the new FT9-MS-1 mode coming out in a few months.
>> Sandyman
>>
>>
>>
>> Sent from Mail for Windows 10
>>
>> From: Joel Harrison
>> Sent: Sunday, March 1, 2020 4:59 PM
>> To: HamOP
>> Cc: David Norris; adxa at mailman.qth.net
>> Subject: Re: [ADXA] 28mc VP8PJ
>>
>> San - you need to move up to the 21st century and get on FT8!!!!!! :-)))))
>>
>>
>> On Mar 1, 2020, at 4:52 PM, HamOP <k5yy1 at cox.net> wrote:
>>
>>
>> Think lot of this discusson on what , who and where came from the early 28mc spot by WD9Q about 28180 FT being LP and not PJ… that was about 90 minutes ago. He did not mention other frequencies lower down initially, only 28180 on 10m..
>> Does not affect me, since I am not an FT8 guy…. I have the VP8 on 28 and 24 mc from years ago but still would be nice to work them on THIS trip on top two bands.. Won’t happen for me. Anyway was just trying to tell Dave to check his QSO stream. Frequencies were not mentioned, only the band in the initial comments.. Lot going on now with the VP8 and confusing in some cases.
>> San
>>
>> Sent from Mail for Windows 10
>>
>> From: HamOP
>> Sent: Sunday, March 1, 2020 3:19 PM
>> To: David Norris
>> Cc: Jay Bromley; adxa at mailman.qth.net
>> Subject: RE: [ADXA] 28mc VP8PJ
>>
>> Now the spots are saying it is VP8LP , not PJ… Sorry for bad news Dave.
>> s
>>
>> Sent from Mail for Windows 10
>>
>> From: David Norris
>> Sent: Sunday, March 1, 2020 3:04 PM
>> To: HamOP
>> Cc: Jay Bromley; adxa at mailman.qth.net
>> Subject: Re: [ADXA] 28mc VP8PJ
>>
>> FT-8 At -12 to -16. Now they just switched to FT-4 . A bunch of LU’s and a couple of ZS6’s are -10 to -15 on 10m. You can hear their “whistle” so be watching for a CW opening... They are audible.
>>
>> 73
>>
>> David A. Norris, K5UZ
>> Director, Delta Division
>>
>> Sent from my iPhone
>>
>>
>> On Mar 1, 2020, at 2:58 PM, HamOP <k5yy1 at cox.net> wrote:
>>
>>
>> Phone or CW?? I hear nothing… perhaps you used the ‘sub audible’ mode of FT8 land? I never heard them on 24 SSB or CW yet, much less 28mc, shown to be mainly at 19-2000Z… No color on my VOACAP chart for 28mc. At least got em on 21 RTTY.
>> San
>>
>> Sent from Mail for Windows 10
>>
>> From: David Norris via ADXA
>> Sent: Sunday, March 1, 2020 2:39 PM
>> To: Jay Bromley
>> Cc: adxa at mailman.qth.net
>> Subject: Re: [ADXA] 15M VP8
>>
>> I just bagged them on 10m!
>>
>> It’s open boys!
>>
>> Help yourselves!
>>
>> 73
>>
>> David A. Norris, K5UZ
>> Director, Delta Division
>>
>> Sent from my iPhone
>>
>>
>>
>>
>> On Mar 1, 2020, at 12:31 PM, Jay Bromley <jayw5jay at cox.net> wrote:
>>
>>
>> Rick K5UR just spotted them on 15m SSB. Those big guns! 😊
>>
>> 73 de jay/w5jay..
>> ______________________________________________________________
>> ADXA mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/adxa
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:ADXA at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>> ______________________________________________________________
>> ADXA mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/adxa
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:ADXA at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>
>> ______________________________________________________________
>> ADXA mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/adxa
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:ADXA at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> ADXA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/adxa
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ADXA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/adxa/attachments/20200301/30b48e7e/attachment.html>
More information about the ADXA
mailing list