[ACARS] ACARSD

Sun, 18 May 2003 09:43:26 -0700

Hi Allen ,
  Try using WACARS as the final reference base - I use Skyspy as the DDE so use ACARSD as the DDE and WACARS as the final format -
It will read the WACARS Aircraft Base and all the over Data bases inside WACARS .
Format will look like this .
----------------------------------------------------09:39:31, 18/05/2003
N778AS B737-4Q8 25110/2586
Alaska Airlines AS0072 Sitka-Juneau-Seattle
Using Ground Station 2 .Message No. M36A
Message Type 80 ALASKA AIRLINES DEFINED
3701 INRANG 0072/18  JUNEAU  / SEATTLE-TACOMA   .N778AS
/ESTIMATED TIME OF ARRIVAL 1717/ESTIMATED RAMP TIME AT:

I have listed the Biz and LOT with out the Hyphen .
Just a thought .
Tony
Ladysmith

-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of Allen Watkin
Sent: Sunday, May 18, 2003 8:04
To: [email protected]
Subject: [ACARS] ACARSD

Hi
I have just begun using the acarsd program(windows version)...played around
with the seetings
to allow the program to run with Air Nav 4, and it works fine, apart from
one thing.
Aircraft registrations without a hyphen( mainly biz jets and LOT E145s), do
not transfer into the
flight list grid on AN4.
Maybe you can make a slight alteration to the program to allow this.

Regards
Allen

_____________________________________________
Acars info and Aircraft ID answers go to: http://www.acarsonline.co.uk
[email protected]
http://mailman.qth.net/mailman/listinfo/acars