[ACARS] Running WACARS twice

[Fletcher]

Hi All ,
    For those using SkySpy with WACARS as DDE etc you can also run another WACARS screen using a second Scanner - Skyspy is not
using the sound card so it frees up the Sound card - I have tested it and it works .
    You will have to set in your sample rate and turn off the DDE when you start the second WACARS screen  also plug in your cord to
the second scanner and set the Linein etc - On test I found it sends all the Message logs to one file but your Flight a
 Aircraft file will be separate but in the same file .
    After saving the days data you have to set WACARS DDE and turn off the sample rate to run with SkySpy  and then start the second
WACARs and set in the Sample rate - it will show up on the Signal Strength  bar etc .
Tony




Tony Fletcher
Ladysmith B.C.
Vancouver Island
B.C.Canada
N48.59 - W123.50
ACARS Decoder
Wacars .7
SkySpy
e-mail
fletchet@shaw.ca