[AATV] Looking for ATV trasmitter board information - AAA5 ATV

[Greg Mijal]

Hello:
I'm Greg WA7LYO and new to the ATV reflector.

A couple of days ago I found an ATV transmitter in one of my storage boxes.  My thoughts are to use the transmitter as a wireless survelliance camera in my back yard.
I do not have any data on the transmitter so I'm on a hunt for any doc's associated with it.
Here's a general description:
Transmitter acquired in Phoenix Arizona and it looks like the TX was built in the 1980's.
The PCB is 3.5 X 7.5 inch and is an etched board. 
It uses devices such as the MRF 901 and a 2N2219A is heatsinked with a multi-wing, slip on heat sink.  Other devices are 2N5770, LM 741 in a can. Approximately 10 TO - 92 devices. On board HC/59 crystal is marked 108.500. Three control pots and seven adjustable mini-caps.  Front of cabinet is marked: AAA5 ATV.
Any advice or doc's would be very helpful and gratfully accepted.  This is my first walk down the ATV trail.
73's
Greg
WA7LYO
Kinston NC