I have made some new measurements on my power and antenna for 630m. I am getting the following:
Total system Rt = 225 ohms
Radiation resistance Rr = ~.032 ohms
Total current measured at the top of the loading coil = 0.125 amperes
TPO = 8.0 watts into the coax
EIRP = ~1.5 mW which is 10 dB better than what I was doing previously according to today's ground
wave comparisons with ka7oei-1 and ka7oei. Thus, my previous power must have been about 0.15 mW which I could not report correctly previously using wsjtx. This is because zero dBm = 1 mW is the lowest choice in that software.
Wondering if any of this makes sense to any of you !!!
Helpful comments are welcome.
Thanks,
*´¨)
¸.•´¸.•*´¨) ¸.•*¨)
(¸.•´ (¸.•` Neil , wØyse,
DN41ah, North Ogden, Utah 84414