Doug, with the Flex there is probably another way also but....
I get one instance working  with my TS-590sg, then run wsjtx again and tell it no radio and just let it use the same audio from the Kenwood.  No cat control that way but basic monitoring two different modes on the same frequency.
Tom N9RU

BTW, I'm usually on early most mornings between 0915 and 1000z on CW near 474.5
John, KB5NJD is usually on too WX permitting.

73

> On Jul 30, 2022, at 17:21, Doug Allen <dougk4ly@gmail.com> wrote:
>
> 
> With VHF E-skip season almost over, and reading about 630m activity, I thought I'd try some 630M monitoring here in EM85wb.  Remind me how to receive both FST-120 and WSPR at the same time. I'm using a Flex 6500 transceiver. Tonight I'll just use a Hygain Hytower for receive, though I have other antennas including directional flags, etc.
>
> In September, maybe I'll be able to get a transmit umbrella antenna up again, an antenna that has worked well here since the days of  FCC experimental licenses (thanks KB5NJD).  If not, and it will be difficult at age 82, I'll sell my Monitor Sensors 2200 and 630m transverters.
>
> Doug K4LY
> ______________________________________________________________
> 600MRG mailing list
> Home: http://mailman.qth.net/mailman/listinfo/600mrg
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:600MRG@mailman.qth.net
>
> This list hosted by: https://www.qsl.net
> Please help support this email list: https://www.qsl.net/donate.html