[600MRG] wspr RX's on 630m

[John Langridge]

Thanks Neil and congrats on another good night.

I am revising my EIRP up to something between 0.5 and 0.75 watts due
to slighter higher TPO.  My current meter is not graduated very well
or linear for such low current measurements so there is some guess
work compared to the levels I normally operate at.   System impedance
tends to wander a bit at the lower power level and the PS teeters on
going into and out of current limit based on where I have it set.
Needless to say, it is more stable at slightly higher power levels.

73,

John..

On 1/5/23, Neil Klagge <w0yse at msn.com> wrote:
> Received these four wspr stations this session.  The # of spots is lower
> than usual because I was TXing at 50% of the time. John, KB5NJD was my DX
> this session.
>
>
> 4 spots:
>
> Timestamp       Call    MHz     SNR     Drift   Grid    Pwr     Reporter
>    RGrid   km      az      Mode    # Spots
>  2023-01-05 06:10        VE7BDQ          0.475730        -20     0
> CN89la          1       W0YSE   DN41ah          1218    131     2       18
>  2023-01-05 06:06        KE7A    0.475751        -29     0       EM12kx
>     2       W0YSE   DN41ah          1605    310     2       13
>  2023-01-05 05:50        KR6LA   0.475666        -20     0       CN90ao
>     10      W0YSE   DN41ah          843     81      2       17
>  2023-01-05 05:26        KB5NJD          0.475617        -23     0
> EM12mp          0.1     W0YSE   DN41ah          1640    310     2       22
>
>
>
> *´¨)
> ¸.•´¸.•*´¨) ¸.•*¨)
> (¸.•´ (¸.•`   Neil , wØyse, DN41ah, North Ogden, Utah 84414
>
> My ham radio website: http://w0yse.webs.com/
> <http://wg2xsv.webs.com>
> My Faith website: http://neilsfaith.webs.com/
>