[600MRG] 630 with a 68ft vertical?

Gedas w8bya at mchsi.com
Wed Sep 30 11:57:17 EDT 2020


WAG here but I would venture to say if you had that antenna and drove it 
with 30W or so you will not have any trouble making QSO's all over NA 
given "normal" conditions. Make the coil HUGE in dia (like 8-10 inches) 
and of large AWG (like #6 - #8 etc copper wire) to minimize losses and 
you will have a blast. See if you can bring down a pair of wires from 
the top, spaced 180 degrees apart down at an angle to add a capacity 
hat. If you can make them 50' or so that will help a lot.

Gedas, W8BYA EN70JT

Gallery at http://w8bya.com
Light travels faster than sound....
This is why some people appear bright until you hear them speak.

On 9/30/2020 11:41 AM, Jim Miller wrote:
> What sort of efficiency could I expect with just base loading a 68ft 
> vertical on 630m? I have 32 radials with an average length of 100ft.
>
> For a long list of reasons I can't top load this antenna at all, nor 
> do I have any other antenna possibilities.
>
> I can put effort into making the loading coil as efficient as possible.
>
> Thanks!
>
> jim ab3cv
>
> ______________________________________________________________
> 600MRG mailing list
> Home: http://mailman.qth.net/mailman/listinfo/600mrg
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:600MRG at mailman.qth.net
>
> This list hosted by: https://www.qsl.net
> Please help support this email list: https://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/600mrg/attachments/20200930/8ddb6e5e/attachment.html>


More information about the 600MRG mailing list