[600MRG] [rsgb-lf-group] JT9-10 vs JT9-5 test

[Rik Strobbe]

Hello Paul, all,

JT9-5: my mistake!
I was running SlowJT9 v0.9.12.5 for JT9-5 and that version will not decode below 400Hz.
I should have known better ...

I will install a second version of v0.9.14.0 (using the ZIP file) and runmonitor both JT9-5 and JT9-10 with v0.9.14.0.

73, Rik  ON7YD - OR7T

________________________________________
Van: rsgb-lf-group at groups.io <rsgb-lf-group at groups.io> namens N1BUG <paul at n1bug.com>
Verzonden: zondag 13 januari 2019 12:52
Aan: rsgb_lf_group at blacksheep.org; rsgb-lf-group at groups.io; Discussion of the Lowfer (US, European, & UK) and MedFer bands; 600MRG at mailman.qth.net
Onderwerp: Re: [rsgb-lf-group] [600MRG] JT9-10 vs JT9-5 test

Hello Rik,

Thanks for this report. It is interesting you did not decode me on
JT9-5 since some of the JT9-10 reports indicate the signal was
strong enough. Perhaps just the timing of QSB. I did receive JT9-5
reports from other stations so I believe my transmissions were OK.

The test will continue for two more nights if there are no equipment
malfunctions.

73,
Paul N1BUG


On 1/13/19 3:42 AM, Rik Strobbe wrote:
> Hello Paul, Alex,
>
> below my overnight JT9-10 copies .
> Not a single copy in JT9-5.
> The last copy of Paul (so far) was at 08.00 UTC, in broad daylight.
>
> 73, Rik  ON7YD - OR7T
>
> 2240 -36 -0.6  405 X  R7NT KN97LF
> 2250 -36 -0.6  405 X  R7NT KN97LF
> 2300 -36 -0.6  405 X  R7NT KN97LF
> 0010 -37 -0.6  405 X  R7NT KN97LF
> 0020 -36 -0.8  395 X  VVV N1BUG X
> 0040 -35 -0.8  395 X  VVV N1BUG X
> 0100 -37 -0.8  395 X  VVV N1BUG X
> 0100 -37 -0.6  405 X  R7NT KN97LF
> 0110 -34 -0.6  405 X  R7NT KN97LF
> 0120 -37 -0.6  405 X  R7NT KN97LF
> 0130 -35 -0.6  405 X  R7NT KN97LF
> 0140 -36 -0.8  395 X  VVV N1BUG X
> 0140 -34 -0.5  405 X  R7NT KN97LF
> 0150 -34 -0.4  405 X  R7NT KN97LF
> 0200 -33 -0.8  395 X  VVV N1BUG X
> 0200 -33 -0.6  405 X  R7NT KN97LF
> 0210 -33 -0.6  405 X  R7NT KN97LF
> 0220 -29 -1.0  395 X  VVV N1BUG X
> 0220 -34 -0.6  405 X  R7NT KN97LF
> 0230 -33 -0.6  405 X  R7NT KN97LF
> 0240 -30 -0.8  395 X  VVV N1BUG X
> 0240 -37 -0.7  405 X  R7NT KN97LF
> 0300 -31 -0.6  395 X  VVV N1BUG X
> 0300 -35 -0.6  405 X  R7NT KN97LF
> 0310 -33 -0.6  405 X  R7NT KN97LF
> 0320 -34 -0.8  395 X  VVV N1BUG X
> 0320 -34 -0.6  405 X  R7NT KN97LF
> 0330 -35 -0.6  405 X  R7NT KN97LF
> 0340 -34 -0.8  395 X  VVV N1BUG X
> 0340 -36 -0.5  405 X  R7NT KN97LF
> 0350 -35 -0.6  405 X  R7NT KN97LF
> 0400 -36 -0.8  395 X  VVV N1BUG X
> 0620 -36 -0.8  395 X  VVV N1BUG X
> 0640 -31 -0.8  395 X  VVV N1BUG X
> 0700 -32 -1.0  395 X  VVV N1BUG X
> 0720 -30 -1.0  395 X  VVV N1BUG X
> 0740 -30 -0.8  395 X  VVV N1BUG X
> 0800 -34 -0.8  395 X  VVV N1BUG X
>
> ________________________________________
> Van: Rik Strobbe
> Verzonden: zaterdag 12 januari 2019 22:00
> Aan: rsgb_lf_group at blacksheep.org; rsgb-lf-group at groups.io; Discussion of the Lowfer (US, European, & UK) and MedFer bands; 600MRG at mailman.qth.net; paul at n1bug.com
> Onderwerp: Re: [600MRG] JT9-10 vs JT9-5 test
>
> Hello Paul,
>
> I will monitor both modes overnight on 136kHz dial and report in the morning.
> In JT9-10 I had 5 copies of R7NT so far (QRB 2505km).
>
> 73, Rik  ON7YD - OR7T

-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#8481): https://groups.io/g/rsgb-lf-group/message/8481
Mute This Topic: https://groups.io/mt/29062197/1555778
Group Owner: rsgb-lf-group+owner at groups.io
Unsubscribe: https://groups.io/g/rsgb-lf-group/leave/3440736/168031436/xyzzy  [rik.strobbe at kuleuven.be]
-=-=-=-=-=-=-=-=-=-=-=-