[600MRG] [rsgb-lf-group] SlowJT9 update (v0.9.14.0)

[Roger Graves]

Hi Neil. 

I turned on my RX when I saw your email. It decoded your next sequence.
0640 -18 -0.6 411 X 1W JT10 W0YSE 

I will leave my RX running overnight.

73,
Roger

> On Jan 7, 2019, at 10:17 PM, Neil Klagge <w0yse at msn.com> wrote:
> 
> I downloaded and installed v0.9.14 setup and also the zip (using the same procedure as we have been doing)
> 
> Running JT9-10 on main pc at 410 hz offset, Rxing on second radio/pc but the RX pgm will not decode this mode. 
> 
> Will let the bcn run tonight and hope someone can decode it. (txing on first cycle, dial at 474.2 khz)
> 
> 73 
> Neil, w0yse, CN85rq
> Vancouver, WA
> 
> My ham radio website: http://w0yse.webs.com/ <http://w0yse.webs.com/> 
>  <http://wg2xsv.webs.com/>
> My Faith website: http://neilsfaith.webs.com/ <http://neilsfaith.webs.com/>
> From: 600mrg-bounces at mailman.qth.net <mailto:600mrg-bounces at mailman.qth.net> <600mrg-bounces at mailman.qth.net <mailto:600mrg-bounces at mailman.qth.net>> on behalf of N1BUG <paul at n1bug.com <mailto:paul at n1bug.com>>
> Sent: Monday, January 7, 2019 6:08 AM
> To: rsgb-lf-group at groups.io <mailto:rsgb-lf-group at groups.io>; rsgb_lf_group at blacksheep.org <mailto:rsgb_lf_group at blacksheep.org>; 600MRG at mailman.qth.net <mailto:600MRG at mailman.qth.net>
> Subject: Re: [600MRG] [rsgb-lf-group] SlowJT9 update (v0.9.14.0)
>  
> Hello Rik, all,
> 
> I look forward to doing a JT9-5 vs JT9-10 test.
> 
> My station is off the air for a couple of days with minor technical
> problems. Also there is some bad weather coming. Probably I can
> begin testing JT9-10 by the end of the week.
> 
> 73,
> Paul N1BUG
> 
> 
> 
> On 1/7/19 7:53 AM, Rik Strobbe wrote:
> > Dear all,
> >  
> > Beta-release v0.9.14.0 of SlowJT9 has been uploaded, see http://www.472khz.org/SlowJT9/ <http://www.472khz.org/SlowJT9/>.
> > 
> > Changes:
> > -JT9-10 mode added.
> > - Waterfall speed will adapt to selected JT9 submode.
> > - Any (reasonable) value can be entered for tone spacing (allowing flexible frequency dividing of the modulated signal).
> > - Lower frequency limit dropped to 200 Hz (was 400 Hz).
> > - Option to discard the audio frequency limits added (Settings -> Mode).
> >   In that case the TX boundaries will be 100 - 4980 Hz regardless of the JT9 submode.
> >   The RX boundaries however will still be limited by the resampling process:
> >   JT9-1: 100 - 4980 Hz
> >   JT9-2: 100 - 2240 Hz
> >   JT9-5: 100 - 840 Hz
> >   JT9-10: 100 - 415 Hz
> > - Non fatal bug fixed that skipped PTT handling in the first TX cycle after 'Halt TX' was pressed.
> > 
> > Bug reports, remarks and suggestions are welcome.
> > 
> > 73, Rik  ON7YD - OR7T
> ______________________________________________________________
> 600MRG mailing list
> Home: http://mailman.qth.net/mailman/listinfo/600mrg <http://mailman.qth.net/mailman/listinfo/600mrg>
> Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm>
> Post: mailto:600MRG at mailman.qth.net <mailto:600MRG at mailman.qth.net>
> Message delivered to w0yse at msn.com <mailto:w0yse at msn.com>
> 
> This list hosted by: https://www.qsl.net <https://www.qsl.net/>
> Please help support this email list: https://www.qsl.net/donate.html <https://www.qsl.net/donate.html>
> ______________________________________________________________
> 600MRG mailing list
> Home: http://mailman.qth.net/mailman/listinfo/600mrg <http://mailman.qth.net/mailman/listinfo/600mrg>
> Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm>
> Post: mailto:600MRG at mailman.qth.net <mailto:600MRG at mailman.qth.net>
> Message delivered to ve7vv at qsl.net <mailto:ve7vv at qsl.net>
> 
> This list hosted by: https://www.qsl.net <https://www.qsl.net/>
> Please help support this email list: https://www.qsl.net/donate.html <https://www.qsl.net/donate.html>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/600mrg/attachments/20190107/a882967f/attachment.html>