[600MRG] Fwd: QRSS and Proper ID

[Bart Lee]

---------- Forwarded message ----------
From: William E. Isakson <bill.isakson at gmail.com>
Date: Wed, May 23, 2018 at 4:00 PM
Subject: Re: [600MRG] QRSS and Proper ID
To: Bart Lee <bart.lee.k6vk at gmail.com>


It would probably be wise to ID twice.  Once at QRSS and once at 15WPM or
so, both of which can be automatic ID  at ten minute intervals. the idea
being to identify yourself.   It is not the letter of the law, but the
intent that is most important.  Besides, we are not trashy operators who
are hiding ourselves like we sometimes see on the other bands.  Some people
do not understand QRSS, but 15WPM is not going as far as your QRSS signal
will, so we need both.

Bill

--------


Bill Isakson     AC6QV
Roseburg, Oregon USA
bill.isakson at gmail.com



On Wed, May 23, 2018 at 1:08 PM, Bart Lee <bart.lee.k6vk at gmail.com> wrote:

> Hi Frank,
>
> I think the ID required does NOT have to be in the same mode as the
> transmission -- hence Morse code IDs on VHF FM repeaters. So I would just
> put in a fast Morse ID every ten minutes. The main purpose of the ID
> requirement is to abate local interference, and only nearby stations will
> hear /see the fast ID.
>
> 73 de Bart, K6VK ##
>
>
> -- --
> Bart Lee, K6VK, CHRS, AWA, ARRL***
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/600mrg/attachments/20180523/bacd9da4/attachment.html>