[600MRG] WSQ operations at w0yse tonight

[Neil Klagge]

As most of you know, I have been trying out different frequencies for my WSQCall operations. I want to stay within the USB passband of the WSPR dial frequency so that those who have only one radio can be able to access JT9, WSPR, WSQ modes with one *dial* QRG (for those using the DL version of WSQ2).

I will be moving up another 700 hz from the previous session to an RF tone frequency of 476.7 kHz. This corresponds to a spot on the WSPR waterfall of +2500 hz (for those with dial at 474.2).

My plan is to be farther above the JT9 and WSPR segments but not out of the passband as mentioned above. If this is a problem, I can move lower in the future, but I cannot move higher and satisfy the conditions mentioned in my first paragraph above.

Since I will be using the ZL version (WSQCall) which has a fixed tone of +1500 hz, my USB DIAL freq will be set to 475.2 kHz.

Others who want to use a much higher dial or tone frequency are welcome to explore other options.

Thanks for your patience with all my moves as I try to make something work for most of us.

73,
Neil Klagge, w0yse
Vancouver, WA


Sent from Neil's iPad....
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/600mrg/attachments/20180329/accd87dd/attachment.html>