[600MRG] WSQCall Operation at KU4XR

[Andy - KU4XR]

Roger that Neil:

Immediately finding out some can't do's with the software.. when sze is TXing ( every 2 minutes ) my radio is deafened
by his 40 over S-9 signal .. His every 60 Hz harmonic falls in the receive window and the WSPR offsets generate 
lots of random characters during his transmissions, and go above the Squelch level, thus prohibiting my transmitter 
from coming on..
This isn't mode protocol, but I will disengage the TX Inhibit function or my transmitter will never come on .. 
Unfortunately, I am afraid that I won't be able to hear anyone during his transmissions.. 

Andy - KU4XR
--------------------------------------------
On Wed, 3/14/18, Neil Klagge <w0yse at msn.com> wrote:

 Subject: Re: [600MRG] WSQCall Operation at KU4XR
 To: "Andy - KU4XR" <ku4xr at yahoo.com>, "Posting 600m 600mrg" <600mrg at mailman.qth.net>
 Date: Wednesday, March 14, 2018, 11:22 PM
 
 
 
 Andy, sounds good.
 The guys in the east were asking for someone to be on WSQ.
 Glad you are jumping into the waters...
 
 
 
 Good luck and have
 fun. I am still learning what works too. 
 
 
 
 
 
 
 73
 
 
 Neil, w0yse,
  CN85rq
 
 
 Vancouver,
 WA
 
 
 
 
 
 
 
 My
 ham radio
 websites:
 http://w0yse.webs.com/ and
 http://wg2xsv.webs.com
 
 
 
 
 My
 Faith
 website:
 http://neilsfaith.webs.com/
 
 
 
 
 
 
 From: 600mrg-bounces at mailman.qth.net
 <600mrg-bounces at mailman.qth.net> on behalf of Andy -
 KU4XR via 600MRG <600mrg at mailman.qth.net>
 
 Sent: Wednesday, March 14, 2018 8:13:42 PM
 
 To: 600 meter group
 
 Subject: Re: [600MRG] WSQCall Operation at
 KU4XR
  
 
 
 Forgot to
 mention the Frequency details.. My signal will be close to
 1300 Hz if you are watching a WSJT waterfall
 
 with a dial frequency of 474.200 KHz.. Using WSQCall; set
 your dial to 474.000 KHz..
 
 actual frequency will be 475.500 +/- 10 Hz from drift on my
 end - still decodable with the drift..
 
 I hope that covers all the details..
 
 
 
 Andy - KU4XR
 
 --------------------------------------------
 
 On Wed, 3/14/18, Andy - KU4XR via 600MRG
 <600mrg at mailman.qth.net> wrote:
 
 
 
  Subject: [600MRG] WSQCall Operation at KU4XR
 
  To: "600 meter group"
 <600mrg at mailman.qth.net>
 
  Date: Wednesday, March 14, 2018, 11:06 PM
 
  
 
  Hi all:
 
  
 
  Hoping that I have correct settings,
 
  and an understandable message; I will be running WSQCall
 in
 
  " Sounding "
 
  mode every 10 minutes with transmission
 
  on the "3's " ie: 3 min, 13 min, 23 min, etc
 .. I am brand
 
  new to this
 
  software, so if you query my station...
 
  well, frankly, I do not know exactly What you will get
 in
 
  return ..
 
  Send ku4xr? and see if you get a signal
 
  report back from me..
 
  Send ku4xr@ and see if you get my
 
  location sent back to you..
 
  Send ku4xr& and tell ME what you
 
  get back ( ??? )..
 
  All this stuff was programmed to run in
 
  the WSQCall program, so I don't know what will happen
 ( if
 
  anything ),
 
  if you send using WSQ2 , but we can
 
  certainly find out .. 
 
  
 
  73 all, and Good DX:
 
  
 
  Andy - KU4XR
 
  ______________________________________________________________
 
  600MRG mailing list
 
  Home: http://mailman.qth.net/mailman/listinfo/600mrg
 
  Help: http://mailman.qth.net/mmfaq.htm
 
  Post: mailto:600MRG at mailman.qth.net
 
  
 
  This list hosted by: http://www.qsl.net
 
  Please help support this email list: http://www.qsl.net/donate.html
 
  
 
 ______________________________________________________________
 
 600MRG mailing list
 
 Home: http://mailman.qth.net/mailman/listinfo/600mrg
 
 Help: http://mailman.qth.net/mmfaq.htm
 
 Post: mailto:600MRG at mailman.qth.net
 
 
 
 This list hosted by: http://www.qsl.net
 
 Please help support this email list: http://www.qsl.net/donate.html