[600MRG] WSQCall Operation at KU4XR

[Andy - KU4XR]

Forgot to mention the Frequency details.. My signal will be close to 1300 Hz if you are watching a WSJT waterfall
with a dial frequency of 474.200 KHz.. Using WSQCall; set your dial to 474.000 KHz..
actual frequency will be 475.500 +/- 10 Hz from drift on my end - still decodable with the drift..
I hope that covers all the details..

Andy - KU4XR
--------------------------------------------
On Wed, 3/14/18, Andy - KU4XR via 600MRG <600mrg at mailman.qth.net> wrote:

 Subject: [600MRG] WSQCall Operation at KU4XR
 To: "600 meter group" <600mrg at mailman.qth.net>
 Date: Wednesday, March 14, 2018, 11:06 PM
 
 Hi all:
 
 Hoping that I have correct settings,
 and an understandable message; I will be running WSQCall in
 " Sounding "
 mode every 10 minutes with transmission
 on the "3's " ie: 3 min, 13 min, 23 min, etc .. I am brand
 new to this
 software, so if you query my station...
 well, frankly, I do not know exactly What you will get in
 return ..
 Send ku4xr? and see if you get a signal
 report back from me..
 Send ku4xr@ and see if you get my
 location sent back to you..
 Send ku4xr& and tell ME what you
 get back ( ??? )..
 All this stuff was programmed to run in
 the WSQCall program, so I don't know what will happen ( if
 anything ),
 if you send using WSQ2 , but we can
 certainly find out .. 
 
 73 all, and Good DX:
 
 Andy - KU4XR
 ______________________________________________________________
 600MRG mailing list
 Home: http://mailman.qth.net/mailman/listinfo/600mrg
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:600MRG at mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html