[600MRG] WSQ2 operations in EU

[Neil Klagge]

I was interested to read this by Wolf DL4YHF in his manual for his QSO version of WSQ, where he talks about how it is (or might be) used in Europe:


''By default (or "convention" amongst MF users in Europe), tune your receiver to 474.2 kHz in USB, and leave the 'base frequency' (=audio frequency of the lowest WSQ tone) set to 1000 Hz. That way, you can have WSQ, WSPR, and JT9 (WSJT-X) running on the same PC, connected to the same receiver."


I see no problem with this for NA users of WSQ2, especially now that the default tone spacing is the same 1.46xxx hertz that WSQCall uses, which yields a signal width of only 50 hz.


Can JT9, FT8, and WSQ all share the same 800-1350 hz area on our 630m band? If not, why not ??  Just a question for friendly discussion.


Thanks for ur thoughts....


73
Neil, w0yse, CN85rq
Vancouver, WA

My ham radio websites: http://w0yse.webs.com/ and http://wg2xsv.webs.com
<http://wg2xsv.webs.com>
My Faith website: http://neilsfaith.webs.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/600mrg/attachments/20180220/bacacace/attachment.html>