[600MRG] Tonights WSQ operations at w0yse

[Roger Graves]

It might have been me. At one point I was replying to Nei’s CQ’s and sent a “hi neil”.

> On Feb 7, 2018, at 9:55 PM, Ben Gelb <ben at gelbnet.com> wrote:
> 
> Opened the WSQ software and exactly three characters "hi." were decoded out of the noise....
> 
> screenshot:
> https://snag.gy/mucDsg.jpg <https://snag.gy/mucDsg.jpg>
> 
> <image.png>
> 
> A ghost in the ether??
> 
> On Tue, Feb 6, 2018 at 6:16 PM, Neil Klagge <w0yse at msn.com <mailto:w0yse at msn.com>> wrote:
>  
> This is reminder of the new frequency for my WSQcall operations which started yesterday evening. I have moved to the upper part of the 630m band, above the WSPR segment.
> 
>  “w0yse” will be running WSQCall mostly sunset to sunrise (but, not TX-ing if I am away from the house) on 477.1 kHz (USB DIAL at 475.6) for those who want to try this program at their stations. If you decode my beacon, you can trigger my station to give you a signal report by typing the following (all lower case) w0yse? which asks my program to send out a signal report to you. If I am in the shack and see that you are decoding me, I might try a QSO with you, if you like.
>  
> Note that call signs in this program are case sensitive so there must be a perfect match with whatever an operator uses in the callsign box (under OPTIONS or TOOLS, depending on which version you are using). Another command you can use is w0yse@ which will transmit my QTH info.
>  
> In order to decode a station, both must be set to the SAME speed (unlike FSQcall). I will likely be at a speed of .5 except when in QSO with a station with good prop between us.
>  
> You can find a link to the program on this page:
>  http://www.qsl.net/zl1bpu/MFSK/WSQweb.htm <http://www.qsl.net/zl1bpu/MFSK/WSQweb.htm> 
> where you will also find information on how and what the program is all about. It is a QSO mode program that, although slow printing (about 5 wpm), works down to about -28 dB similar to JT9, but with much more flexibility.
>  
> I also have an internet chat page to help you get it working by interacting with others on WSQ. Go to  http://www.dal.net:9090 <http://www.dal.net:9090/> 
> and type in your call (or a nickname) and select #wsq as the chat channel.
>  
> Thanks, good luck and 73
> Neil Klagge, w0yse, Vancouver, WA
> 
> 
> 
> 
> ______________________________________________________________
> 600MRG mailing list
> Home: http://mailman.qth.net/mailman/listinfo/600mrg <http://mailman.qth.net/mailman/listinfo/600mrg>
> Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm>
> Post: mailto:600MRG at mailman.qth.net <mailto:600MRG at mailman.qth.net>
> 
> This list hosted by: http://www.qsl.net <http://www.qsl.net/>
> Please help support this email list: http://www.qsl.net/donate.html <http://www.qsl.net/donate.html>
> 
> ______________________________________________________________
> 600MRG mailing list
> Home: http://mailman.qth.net/mailman/listinfo/600mrg
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:600MRG at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/600mrg/attachments/20180207/74c0774c/attachment.html>