[600MRG] Short Radial Observation - Check this out
Andy - KU4XR
ku4xr at yahoo.com
Fri Aug 31 19:54:12 EDT 2018
Let's try this......let's say you added 3 new radials, are you saying that all you did extra now
was to connect all 3 ends of these radials with a wire and did nothing else? *** ( This is correct ) ***
Gedas, W8BYA
________________________________________________________________________________________
I presumed three of the ends closest to the house were all tied together and bonded to the coax shield
of the feedline. Correct? *** ( They are connected to the Ground Rod of my existing radials ) ***
If so, then the three far ends were left open just laying on the ground. Correct? *** ( Yes ) ***
-Brian, WA1ZMS
________________________________________________________________________________________
In Andy's antenna he connected the radials with a circumference conductive line. No termination was made
as he indicated no connection to ground.
Mel, K6KBE
*** ( Circumference Conductive Line Connection was made at the far ends that were laying on the ground ) ***
________________________________________________________________________________________
Andy - KU4XR
More information about the 600MRG
mailing list