[600MRG] w0yse operations on 160 and 630m tonight

[Neil Klagge]

w0yse is set like last night.  I will have both 160m and 630m running WSQcall v2.00 at 1700 offset, andFT8call at 1800 offset while my USB dials are set to the normal WSPR frequencies of 474.2 and 1836.6 kHz. The LMF system uses the vertical for tx and the eprobe for rx. The UMF system uses my low 95’ long OCFD at 22’ AGL.

We have found that timing is critical with the ft8call program so make sure your PC clocks are accurate.

Not sure how often I will send out beacons tonight. I do not want both programs on the same radio to be sending at the same time since ft8call seems to advance each sequence.

I will try to run WSQ beacons until SR [@1315z] or later. The FT8call pgms will be able to receive 'pings' (requests).

Tnx
Neil



73
Neil, w0yse, CN85rq
Vancouver, WA

My ham radio website: http://w0yse.webs.com/
<http://wg2xsv.webs.com>
My Faith website: http://neilsfaith.webs.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/600mrg/attachments/20180820/387ead29/attachment.html>