[600MRG] WSQCall ver 1.2 is working well on 630m

[Alan Cooper]

Monday, April 23, 2018 7:10 PM
To: 'Posting 600m 600mrg'
Subject: RE: [600MRG] WSQ is working well on 630m

 

Hello All,

 

My receiver running WSQCall Ver 1.2  is now active since before sundown and
will run all night till after sunrise sometime.

I have no transmit but the logger is open and I will print the results here
tomorrow after I wake up from the meds

 

Frequency:

 

-475.2khz rf +1500hz audio 54hz wide channel

 

Equipment:

 

-WSQCall ver. 1.2, on a laptop, uses audio to the mic jack from the
splitter.

-FT-897 using the audio from the headphone jack to the same splitter for
headphone also.

-MFJ-1026 modified for 630M, I run two of these in series for a low noise
floor

-63 foot vertical with 5' elevated ground plane 25 yards from the shack in
the woods.

 

Location CN73, on the beach 1/4mile from the surf near Bandon, Oregon,  USA

 

I am listening for your sounding beacon

 

73

Alan w7aln



____________________________________________________________
 <http://thirdpartyoffers.netzero.net/TGL3242/5adc38ce3aa4a38cd7383st02vuc>
1 Simple Trick Removes Eye Bags & Lip Lines In Seconds
Fit Mom Daily
 <http://thirdpartyoffers.netzero.net/TGL3242/5adc38ce3aa4a38cd7383st02vuc>
http://thirdpartyoffers.netzero.net/TGL3242/5adc38ce3aa4a38cd7383st02vuc
Image removed by sender. SponsoredBy Content.Ad

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/600mrg/attachments/20180423/0d239fad/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 823 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/600mrg/attachments/20180423/0d239fad/attachment.jpg>