[600MRG] w0yse moving WSQCall to 160m, but keeping WSQ2 on 630m

[Neil Klagge]

...from w0yse, Vancouver WA...


I will be moving my "WSQCall" program to 160m for a trial run at a dial freq of 1837.5 kHz. I am hoping it will be visible there without disturbing other digital modes that might be using that area. My antenna is a low (most of it is at 22 ft AGL) OCF dipole that is only 90+ feet long.  I will be running about 5w TPO into it and "sounding" every 10 minutes.


Please give a listen and maybe even request an SNR reply. Reports appreciated.


I will also be on 630m monitoring JT9, WSPR, and WSQ2 (DL-version at +2500 hz). My dial will be at the usual 474.2 kHz spot.


Thanx & 73,

Neil, w0yse, CN85rq
Vancouver, WA

My ham radio websites: http://w0yse.webs.com/ and http://wg2xsv.webs.com
<http://wg2xsv.webs.com>
My Faith website: http://neilsfaith.webs.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/600mrg/attachments/20180410/7b74de11/attachment.html>