[600MRG] Trying different frequency for WSQ at KU4XR

[WM3M]

I was able to copy Andy, KU4XR several times last night WSQ on 476.47.

So my hope is the calling freq or activity freq can be moved into this 
area, away from WSPR. Way too much local WSPR interference for me to 
copy WSQ near the WSPR area.  73

Emory   WM3M

On 4/5/2018 9:05 PM, Andy - KU4XR via 600MRG wrote:
> Hi all:
>
> I am going to try a different frequency for WSQ communication here.. The WSPR QRM is deafening my radio..
> I will try the frequency 476.470 KHz - USB ( Dial Frequency ) putting the 1500 Hz tone at 477.970 KHz..
> This is wedging my receiver in between WSPR harmonics, and getting me high enough in frequency for my
> receiver to breathe a little.. I will be Sounding every 10 minutes, and occassionally calling CQ.. I may not be
> sitting in front of the keyboard every minute of the evening, but try calling me if you want to try WSQ.. I will
> answer if I am here, or when I come into the shack to check activity, I will reply to your call if I see it..
> A sked is a good possibility if desired, so as not to be transmitting to the endless ether..
>
> 73 and best DX:
>
> Andy - KU4XR
> ______________________________________________________________
> 600MRG mailing list
> Home: http://mailman.qth.net/mailman/listinfo/600mrg
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:600MRG at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/600mrg/attachments/20180406/f43a49b6/attachment.html>