[50mhz] Low Pass TVI Filters FS

[Ken Simpson, W8EK]

Low Pass TVI Filters For Sale:

(Including two that are good for six meters!)

A low pass TVI filter is added to the transmitter (inserted
in the coax line after the transmitter or transceiver) to
reduce harmonic interference. All have SO-239 connectors
on each end.

Drake TV-5200-LP
This is the more modern version of the Drake TV-1000 Low Pass
Filter. This is the filter that may also be used on the low
end of six meters, as well as HF. It is good for 1000 Watts
average below 30 MHz, and about 200 W up to 52 MHz. It works
fine, and is in very nice shape. $35

Bud LF-601 low pass filter
This filter is adjustable for best attenuation in your particular
situation, and also to more closely match your specific impedance.
It cuts off just above 6 meters (if adjusted as such), and will
handle 1500 watts.  SO-239 connector on each end.
In extremely nice condition for $35.

Nye Viking Model 020-001
This filter is rated at 2000 watts, with over 65 db of
attenuation above 57 MHz. These are about $60 new; this
one is close to new for only $35.

B & W FL-10/1500 (Formerly known as model 425) low pass filter
B & W TVI filter, 50 ohm. It cuts off just above 10 meters,
and will handle 1500 Watts. This is the latest model B & W
filter. It is in very nice condition; it looks very close to
new. With paper work $40.

Drake TV-3300-LP Low Pass Filter
This is a modern low pass filter to go between your transmitter
and antenna, and has been optimized to have more attenuation
in the 40 MHz region, where many TVs have their IF. It is good
for 1000 Watts "average" according to the manual, and has
over 80 db attenuation at 41 MHz. This one looks great, and
includes the paper work. $30

Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400