[50mhz] Six Meter and other Low Pass TVI Filters FS

[Ken Simpson, W8EK]

For Sale:

Low Pass TVI Filters:

A low pass TVI filter is added to the transmitter (inserted
in the coax line after the transmitter or transceiver) to
reduce harmonic interference.

Drake TV-5200-LP
This is the more modern version of the Drake TV-1000 Low Pass
Filter. This is the filter that may also be used on the low
end of six meters, as well as HF. It is good for 1000 Watts
average below 30 MHz, and about 200 W up to 52 MHz. It works
fine, and is in very nice shape. $35

Bencher YA-1, high power, low pass TVI filter
If you need a more heavy duty filter for the output of
your amplifier, this one is ideal. It will take full legal
power plus, and has at least 80 db signal attenuation at
TV channel 2.
It is also in a very sturdy metal case with SO-239 connectors
on each end, and is a 50 ohm filter.
This one works great, and looks close to new. Someone added
some felt to the bottom, so that it protects better. It is in its
original box, with paper work. Bencher currently sells these
for about $90. This one is only $65.

B & W FL-10/1500 (Also known as model 425) low pass filter
B & W TVI filter, 50 ohm. It cuts off just above 10 meters,
and will handle 1500 Watts. SO-239 connector on each
end. This is the latest model B & W filter. It is in very nice
condition; it looks very close to new. With paper work $40.

Drake TV-3300-LP Low Pass Filter
This is a modern low pass filter to go between your transmitter
and antenna, and has been optimized to have more attenuation
in the 40 MHz region, where many TVs have their IF. It is good
for 1000 Watts "average" according to the manual, and has
over 80 db attenuation at 41 MHz. This one looks great, and
includes the paper work. $30


Coax Cable with Type "N" Connectors:
This cable is made of RG-8 coax and is about 6 feet long.
It has a male type "N" connector on each end. $15


Coax connectors and adapters:
Prices are per connector. Several of each are available.
These are NOS (have not been used).

BNC male for coax cable
standard type - $2
crimp on type - $3

Chassis mount BNC female
square mount (uses 4 screws) - $3
screw in type - $3

BNC 90 degree - female to male - $3

BNC "T" - two female and one male - $3

Antenna adapter to fit the BNC connector on the HT
and provide an SO-239 connector that will permit
a PL-259 to be attached. (BNC male to UHF female) $5

UHF Male (PL-259) to BNC female (opposite of above) $5

UHF double female "Barrel connector" (two SO-239 together) $3

UHF "T" connector with two female (SO-239) and one male
(PL-259) connection - $5

Antenna adapter for Kenwood TH-21/31/41 HTs
Adapts the antenna connector found on these HTs to a
standard PL-259 connector. $6


Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400