[50mhz] suggestions for both 6 and 10 m mobile

[Chris Boone]

Lawton would indicate to me Lawton, OK....but not sure if Lawton had a 6 or
10m rptr. Don't know if there is a Jackson, OK...

As for 10m freq, I would put all the rptr channels and 29.5 as well as 29.6
simplex...To use the rptrs properly, you would need an external PL encoder
as you would run across different tones....

For 6m, 52.525 simplex and look at the local or regional rptrs in your area
and program them in..Add the more popular rptr freqs and add 52.49 simplex
as well...

Chris
WB5ITT

-----Original Message-----
From: 50mhz-bounces at mailman.qth.net [mailto:50mhz-bounces at mailman.qth.net]
On Behalf Of Robert Lowery
Sent: Sunday, November 29, 2009 9:34 PM
To: 50 MHz list
Subject: [50mhz] suggestions for both 6 and 10 m mobile

Just wondering what 6 and 10m frequencies would you put in it a syntor
x9000? It is a 64 channel radio and already has the following (per the
display) now what the PL is or what the receive/transmit channel is i am not
sure. It also has listed "Lawton rpt" and "Jackson" , does anyone know where
these are? 

73 and Thanks / Rob W1RRL