[50mhz] fs: kilowatt amplifier from b,cast service - 4cx1000b

[James M. Walker]

Well the cabinet configuration won't support moving it to 6 meters, without 
changing
from the tuned line the gives the current frequency coverage. However ou 
should be able to shorten the input/output lines and get it up to the 2 
meter range without
butchering the lines too much. They would need to be shortened (both) and
that would give you 2 meter coverage. The manual would help in that regard.
Also there is an Eimac AP-Note on using that tube at 2 meters, if it is 
still
around it would make movint it in frequency a relatively easy chore. YMMV
Jim
WB2FCN
"DC to Light, and beyond"

----- Original Message ----- 
From: "Rev. Robert P. Chrysafis" <kc8gpd at hotmail.com>
To: "50 MHz Listserv" <50mhz at mailman.qth.net>
Sent: Saturday, June 07, 2008 4:35 PM
Subject: [50mhz] fs: kilowatt amplifier from b,cast service - 4cx1000b


> See here for pic's and info.
> http://cnj.craigslist.org/ele/708056950.html
>
>
> I don't know if it is able to be moved to 6 meters or not. maybe someone 
> can use the parts to build a 6 meter kW amp?
>
> i got this from an engineer and i dont mess with tubes or high power stuff 
> so its up for grabs cheap :)
>
>
>
>
> Thank You,
>
> Rev. Robert P. Chrysafis
> Universal Life  Ministries (ULC)
> http://www.ulc.org
>
> Moderator: Ray Brown, KB0STN
> _______________________________________________
> 50mhz mailing list
> Home: http://mailman.qth.net/mailman/listinfo/50mhz
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:50mhz at mailman.qth.net
>
>
>